Hyundai Equus: Input Speed Sensor Specifications
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission Control System / Input Speed Sensor Specifications
| Specifications |
x Type: Hall effect sensor
x Specifications
| Operation condition (°C)°F | ((-)40~150)) -40~302 | |
| Air gap(mm)in. | 1.3(0.0512) | |
| Output voltage | High | 1.4 |
| Low | 0.7 | |
Input Speed Sensor Description and Operation
Description
Input speed sensor is a vital unit that measures the rate of
rotation of the input shaft inside the transmission and delivers the
readings to the TCM. The sensor provides critical ...
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...
See also:
Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...
Starter Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the starter cable (A) from the B terminal on the solenoid, and the connector (B) from the S ter ...
Rear Disc Brake Repair procedures
Removal
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the hose eye-bolt (B) and caliper mounting bolts (C), th ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com