>

Hyundai Equus: Intake Actuator Description and Operation - Blower - Heating, Ventilation and Air Conditioning - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Intake Actuator Description and Operation

Description
The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
    Climate Control Air Filter Repair procedures
    Replacement 1. Remove the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. Remove the filter cover (A) by pressing the knob. 4. Replace t ...

    Intake Actuator Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 ...

    See also:

    Blower Unit Components and Components Location
    Component Location Components 1. Intake Duct Case2. Intake Duct Case (A)3. Intake Door4. Intake Actuator5. Seal6. Blower Upper Case7. Blower Lower Case8. Seal9. Climate Control Air Filter Cover1 ...

    Operating Door Locks From Inside the Vehicle
    With the Door Lock Button : To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark (2) on the door lock button will be visible. To lock a door, push the door ...

    Fuel Sender Assembly Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. "Release the residual pressure in fuel line. (Refer to Fuel Delivery System -""Release Residual Pres ...

    Categories

    Hyundai Equus Manuals


    © 2011-2025 Copyright www.heqmanual.com