>
Replacement |
1. |
Remove the stopper (B) from the glove box (A). |
2. |
Disconnect the air damper (A) from the glove box (B). |
3. |
Remove the filter cover (A) by pressing the knob. |
4. |
Replace the air filter (B) with a new one according to the direction of air filter.
|
Rolling code programming
Rolling code devices which are "code-protected" and manufactured after 1996 may
be determined by the following:
Reference the device owner's manual for verification.
The handheld ...
Rear Wheel House Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protec ...
Crach Pad Center Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...