>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
(Refer to Body - "Bumper") |
3. |
Remove the front fog lamp assembly (A) after loosening screws. |
Installation |
1. |
Install the front fog lamp assembly. |
2. |
Connect the front fog lamp connector. |
3. |
Install the front bumper cover. |
Do not let your parking brake freeze
Under some conditions your parking brake can freeze in the engaged position.
This is most likely to happen when there is an accumulation of snow or ice around
or near the rear brakes or if the bra ...
Power Striker Repair procedures
Inspection
Power Trunk Lid Inspection With GDS
1.
Check the power trunk module input/output value by using the
GDS. If the operation of power trunk module is abnormal, replace power
trunk dri ...
Door Scuff Trim Components and Components Location
Component Location
1. Front door scuff trim2. Rear door scuff trim
...