>
WARNING - Ashtray use
Front
To open the cover, press the cover and it will slowly open. To clean the ashtray, the plastic receptacle should be removed by lifting the plastic ashtray receptacle upward and pulling it out.
Rear
Use the rear ashtray after spreading the cover (1).
To clean the ashtray, the plastic receptacle should be removed by lifting the plastic ashtray receptacle upward and pulling it out.
Fuel Pump Control Module (FPCM) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Check the output voltage of fuel pressure sensor (FPS).
Specification: Refer to “Specification”
...
Relay Box (Engine Compartment) Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Pull out the relay from the engine compartment relay box.
Power Relay (Type A)
-
Do not use pliers.
...
Troubleshooting
Troubleshooting
Category Error symptoms inspection item Detailed inspection item Related partsLighting
•
HUD not working
•
Lighting brightness not automatically controlled (no differen ...