Hyundai Equus: ESP(Electronic Stability Program) System

EPB Switch Repair procedures

Removal 1. Turn ignition switch off and disconnect the battery (-) cable from the battery 2. Remove the driver side crash pad side cover. (Refer to Body - "Crash Pad") 3. Remove the cra ...

Components and Components Location

Components 1. ESP control module (HECU)2. Steering angle sensor3. Rear wheel speed sensor4. Sensor cluster (Yaw rate & Lateral)5. Front wheel speed sensor ...

See also:

High Mounted stop lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear package trim (A). (Refer to Body - "Interior trim") 3. Remove the high mounted stop lamp (A) after removing sc ...

Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto li ...

Overhead Console Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA). 3. Disconnect the sunroof switch conn ...